Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Falls Church: What to Know First
Olympia Chimney chimney liner & rebuild in Falls Church typically runs $1,800-$6,500 depending on whether we’re replacing a flexible stainless liner in a single-flue system or rebuilding a compromised masonry stack with new Olympia-compatible components. Most liner replacements we book are completed in one day; full rebuilds with Olympia Chimney materials usually take two to three days, weather permitting. We are an independent Olympia Chimney service provider - not factory-authorized - which means we source the right parts for your system without markup restrictions and tell you honestly when a quality aftermarket alternative from DuraFlex or Gelco makes more sense than OEM.
This page is for Falls Church homeowners who already have an Olympia Chimney liner, cap, or venting component and need it repaired or replaced correctly the first time. If you are seeing water stains near your fireplace, smelling smoke in upstairs rooms, or pulling chunks of terracotta from your firebox, your flue system is telling you something. Call (571) 489-4365 and a live person will pick up, 24 hours a day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney flexible stainless liners (316Ti and 304 series) develop seam separation at the flex points after 15-20 years of Northern Virginia freeze-thaw cycling. The corrugated sections work harden at the elbows, especially where flues offset to avoid floor joists in Falls Church’s 1950s-1970s split-levels. We cut out the damaged section and splice in a new Olympia-compatible flex run with a mechanical lock seam, or switch to a DuraFlex equivalent if the original spec is discontinued.
- Olympia Chimney’s Gelco-branded rigid liner systems suffer top-down corrosion when caps fail and condensing flue gases pool in the collar. We see this often on homes near Seven Corners where mature oak canopy traps moisture against chimney crowns. The fix is not just a new cap - we drop a camera, map the corrosion depth, and replace only the damaged rigid sections rather than selling a full system.
- Olympia Chimney’s older terracotta-compatible transition plates crack from thermal shock when homeowners burn improperly seasoned wood. The plate sits between a modern insert and original clay flue tiles, and when it fails, smoke leaks into the chimney cavity. We fabricate a replacement transition from HeatShield cerfractory mix or source an Olympia-compatible steel plate depending on the insert BTU rating and clearances.
- Olympia Chimney top-sealing dampers lose their silicone gasket tension after a decade of summer humidity and winter contraction. The damper still looks fine from the hearth, but the seal leaks conditioned air year-round and admits rain that degrades the liner below. We test seal integrity with a smoke pencil during our Level-2 inspection and replace the gasket assembly or recommend a new Gelco damper if the frame is distorted.
- Olympia Chimney’s multi-flue stainless systems in shared masonry chase develop inter-flue pressure imbalance when one appliance is upgraded and the other is not. We see this in Falls Church duplex conversions near Broad Street where a new high-efficiency furnace shares a chase with an original fireplace. The fix is a properly sized liner for each appliance, never a shared flue, with independent termination caps sized to prevent backdrafting.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers, checks our calendar, and books a Level-2 camera inspection. We do not quote liner or rebuild work sight unseen.
- 2
Inspection and documentation. Our technician runs a camera the full flue length, photographs every defect, and measures clearances and square footage. You see the photos on-site and get a plain-English verdict - what is failing, why, and what happens if you wait.
- 3
Parts decision. We identify your Olympia Chimney series and check OEM availability against our inventory of DuraFlex, HeatShield, and Gelco alternatives. If Olympia discontinued your liner gauge, we specify the equivalent or better and explain the difference before you approve.
- 4
Written estimate with upfront pricing. The number on the estimate is the number on the invoice. No surprises, no open-ended “time and materials” language.
- 5
Repair and testing. Background-checked, uniformed technicians complete most liner replacements in one visit. We pressure-test or smoke-test every joint, verify draft with a manometer, and clean the work area to the condition we found it.
- 6
Documentation and guarantee. You receive photos of the completed work, a written summary, and our 90-Day Done Right Promise - in writing, no arguing. If it is not right, we come back.
What Olympia Chimney Chimney Liner & Rebuild Costs in Falls Church
| Job Type | Typical Range | What Moves the Price |
|---|---|---|
| Olympia Chimney flexible liner replacement (single flue, standard height) | $1,800 - $3,200 | Flue length, offset complexity, whether the existing top plate is reusable |
| Olympia Chimney rigid liner repair or section replacement | $900 - $2,400 | Number of damaged sections, access (steep roof, tight chase), cap/damper condition |
| Partial chimney rebuild with new Olympia-compatible liner | $3,500 - $5,800 | Courses of brick to replace, crown reconstruction, flashing integration |
| Full chimney rebuild with new liner system | $5,000 - $8,500 | Height, scaffolding needs, matching historic mortar in Falls Church’s older districts |
| HeatShield cerfractory flue resurfacing (alternative to liner) | $1,200 - $2,800 | Flue square footage, number of cracks, whether a pull-down is required |
These are real 2024-2025 price ranges for the Falls Church market, based on material costs from our suppliers and labor rates that let us keep background-checked technicians on payroll year-round. Every estimate is free, and we honor our standing offers: $50 off any repair over $250, free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (571) 489-4365 for your exact number.
Why Falls Church Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We have been answering the phone with a live person for over 42 years, and we plan to be here when your next liner needs attention. Our 90-Day Done Right Promise is not a slogan - it is in writing, with no paperwork and no arguing, governed by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it.
Russell Haines, our owner, spent the better part of two decades running crews across Northern Virginia, including plenty of seasons in the older colonials near the West Falls Church Metro corridor. He learned early that homeowners who have lived in their houses for twenty-plus years can spot a shortcut from across the room. That is why our technicians document every inspection with photos you can see and a plain-English verdict - documented like an engineer, explained like a craftsman.
We work with Olympia Chimney products regularly, but we are not captive to any single brand. When DuraFlex makes the better flex liner for your application, or HeatShield is the smarter resurfacing choice, we say so. A square deal means no surprises on the bill, and we’ll be there when we say.
FAQs
No - manufacturer warranties on chimney liners cover defects in materials and workmanship from the factory, not who installs them. As an independent Olympia Chimney service provider, we install to NFPA 211 code and document our work so any legitimate warranty claim remains valid. If you are unsure about your warranty status, we will review your paperwork during the inspection at no charge. Call (571) 489-4365 to schedule.
Yes, in most cases. We stock common Olympia Chimney flex and rigid components, and our supply relationships with Famco and Copperfield cover discontinued sizes. When OEM is truly unavailable, we specify an equivalent from DuraFlex or Gelco that meets or exceeds the original UL listing and explain the substitution before you approve any work.
A camera inspection tells the story. Localized damage - a cracked top plate, a separated flex joint, a corroded cap collar - usually means repair. Widesale thinning of the stainless wall, multiple seam failures, or a liner that has pulled away from the thimble means replacement. We show you the footage and give you both options when both are viable, with honest guidance on how long a repair will last versus replacement. Call (571) 489-4365 for a free inspection.
A compromised liner allows heat, smoke, and carbon monoxide to reach combustible framing or living spaces. In Falls Church’s older homes with balloon framing, that risk is not theoretical. Water intrusion through a failed liner also accelerates masonry decay, turning a $2,000 liner replacement into a $6,000 rebuild over a few seasons. We will tell you plainly if your situation allows waiting - some do, some do not - and we never recommend work without camera evidence you can see for yourself.
Most flexible liner replacements are completed in a single day. Rigid liner section repairs or multi-flue systems may run into a second day. Full chimney rebuilds with new liners typically take two to three days, depending on weather and scaffolding needs. We give you a firm schedule at booking and call if anything changes. Call (571) 489-4365 to check availability.
If it is worth heating your home with, it is worth doing the chimney right. For Olympia Chimney liner & rebuild in Falls Church, call Hearthstone Chimney Co. at (571) 489-4365. A live person answers 24 hours a day, estimates are free, and the number we quote is the number on the invoice.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Falls Church and nearby areas.